Teledyne-lecroy QPHY-DDR3 Manuel d'utilisateur télécharger pdf (Page 20)

20 917717 Rev C

QualiPHY tests the oscilloscope connection after clicking the Start button. The system prompts you if

there is a connection problem. QualiPHY’s Scope Selector function can also be used to verify the

connection. Please refer to the QualiPHY Operator’s Manual for explanations on how to use Scope

Selector and other QualiPHY functions.

Accessing the QPHY-DDR3 Software using QualiPHY

This topic provides a basic overview of QualiPHY’s capabilities. Please refer to the QualiPHY Operator’s

Manual for detailed information.

Access the QPHY-DDR3 software using the following steps:

1. Wait for the oscilloscope to start and have its main application running.

2. Launch QualiPHY from the Analysis menu if installed on the oscilloscope or from the desktop icon if

installed on a host computer.

3. From the QualiPHY main window (as follows), select Standard, then DDR3 from the pop-up menu (if

not already selected). If you check the Pause on Failure box (circled) QualiPHY prompts to retry the

test in the case of a failure.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Pas de commentaire

Teledyne-lecroy QPHY-DDR3 Manuel d'utilisateur Page 20