Teledyne-lecroy PETrainer Scripting Language Reference Manual Manuel d'utilisateur Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 89
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
Teledyne LeCroy PETrainer Scripting Language
11
3.1.3 TLPType = IoRd, IoWr
Parameter
Value
Default
Comment
LastDwBe
0:15
0
Byte 7 in the TLP header. See rules for
Last DW BE in the PCI Express
Specification.
FirstDwBe
0:15
0
Byte 7 in the TLP header. See rules for
1st DW BE in the PCI Express
Specification.
Address
0x00000000:
0xFFFFFFFF
0
Bytes 8-11 in the TLP header.
Example 1:
Read one DWORD of data from address 0x1000 of the IO address space.
Length parameter is not specified, so the default value of 1 is used.
TC, TD, EP, Ordering, Snoop, and Tag parameters are not specified, so the default value of 0 is used.
LCRC is not specified, so the LCRC is calculated by software
Packet = TLP {
TLPType = IoRd
Address = 0x1000
}
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 88 89

Commentaires sur ces manuels

Pas de commentaire