Teledyne-lecroy CANbus TD and CANbus TDM - Operators Manual Manuel d'utilisateur télécharger pdf (Page 60)

CANbus Trigger, Decode, and Measure

CANbus-TD-TDM-OM-E RevB

Cable Set Part Number 902329-00

Quantity

Description

0.3 m cable with 9-pin DSUB socket connectors on each

end, and with pins 2 and 7 connected, including 120 ohm

terminations on each end.

2 m cable with 9-pin DSUB socket connectors on each end,

and with pins 2, 3 and 7 connected (but without 120 ohm

terminations). One end has a “Y” connection for parallel

connection of multiple nodes.

0.5 m cable with 9-pin DSUB socket connector on one end,

and wires for pins 2, 3, and 7. No 120 ohm terminations.

CAN adapter with one 9-pin DSUB plug connector and one

9-pin DSUB socket connector with all pins connected.

Includes 120 ohm termination between pins 2 and 7.

Note: This cable set is ideal for high-speed CAN. (ISO 11898-2)

Cable Set Part Number 902330-00

Quantity

Description

0.3 m cable with 9-pin DSUB socket connectors on each

end, and with pins 2, 3 and 7 connected.

2 m cable with 9-pin DSUB socket connectors on each end,

and with pins 2, 3, and 7 connected (but without 120 ohm

terminations). One end has a “Y” connection for parallel

connection of multiple nodes.

0.5 m cable with 9-pin DSUB socket connector on one end,

and wires for pins 2, 3, and 7. No 120 ohm terminations.

Note: This cable set is ideal for low-speed CAN. (ISO 11898-3, ISO 11519, SAE J2411)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 68 69

Pas de commentaire

Teledyne-lecroy CANbus TD and CANbus TDM - Operators Manual Manuel d'utilisateur Page 60